TTEZNSP9625 Patchbay Series
EZ Patchbay Series
MT48/MT52 Patchbay Series
The MT48/52K Patchbay Series offers the end user a rugged cable tray to support rear cabling. Also available is the normals strapped configuration which has the shunts or normals tied together, top to bottom jacks.
Features and Benefits
• Units feature either 48 or 52 MT Jax®
• Steel frame jacks for superior jack life
• Attractive, corrosion resistant nickel-plated jacks
• Gold switching contacts for long-term reliability in normal-through connections
• Offset ground terminal for ease in making common ground buss connections
• Fanned solder terminals for easier solder connections
• Cable tie bar takes the weight of cables off the jacks
• Four jack configurations available for the exact switching arrangement: full normal, half normal, non-normal, and normals strapped
Specifications
Materials
Jacks
Frame: Steel, nickel-plated
Bushing: Brass, nickel-plated
Springs: Nickel silver solder lugs
Ground Terminal: Nickel silver, solder lugs
Switching Contacts: Welded, gold alloy
Insulation: Phenolic spacers, rigid PVC tubing through stack
Screws: Steel, nickel-plated
Panel
Jack Panel: Thermoplastic
Cable Support Bracket: 5/16″ diameter black epoxy painted steel rod
Screws (designation strip): Steel, black zinc-plated
Screws (mounting jack): Steel, nickel plated
Kwik-change® Designation Strip: Extruded aluminum, black anodized
Marking Strip: White plastic, matte finish
Marking Strip Cover: Clear, extruded plastic
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: 0°C to +50°C
Electrical
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500V at 60 Hz AC
Working Voltage: 140 VDC maximum
Current Rating: 100 milliamps
Ordering Information
| Park Number | Type of Jack | No. of Jacks | Description |
| MT48FN | MT | 48 |
Full normals
|
| MT48HN | MT | 48 |
Half normals
|
| MT48NN | MT | 48 |
No normals
|
| MT48NS | MT | 48 |
Normals strapped
|
| MT52FN | MT | 52 |
Full normals
|
| MT52HN | MT | 52 |
Half normals
|
| MT52NN | MT | 52 |
No normals
|
| MT52NS | MT | 52 |
Normals strapped
|
Click here to download a schematic drawing
(you will need to have Adobe Acrobat installed on your system to do this)
Front Access MTPFA/TTPFA Series
The Front Access Series offers the end user the ease of re-terminating patchpoints from the front of the rack as opposed to the back. A slide out tray allows the user to slide out the punchdown terminals, and reconfigure the unit. An easy release mechanism on either side of the unit allows it to be pushed back into place and easy to grip locking nuts tighten the unit in place.
Features and Benefits
• Easy slide-out tray slides forward for easy re-termination from the front of the rack
• Available with either 48 MT style or 96 TT style jacks in a 1RU space
• Attractive, corrosion resistant nickel-plated, steel frame jacks
• Gold-plated switching contacts reduce contact resistance, improves reliability
• Extra wide designation strips for easy channel identification
• Rugged, attractive black epoxy-finished steel chassis
• Configurations available include normals strapped and normals brought out
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel silver with welded contacts
Assembly Screws: Nickel-plated steel
Welded Contacts: Gold alloy
Panel
Frame: C.R.S. black epoxy painted
Designation Strips: Black polycarbonate 94V-0
Designation Strip Covers: Clear polycarbonate
Jack Inserts: Thermoplastic 94V-0
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: -20°C to +65°C
Electrical
Jack Contact Resistance: 30 milliohms initial max.; 50 milliohms after life
Jack Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500V at 60 Hz AC
Working Voltage: 100 milliamps or less; maximum 56.5 VDC
Ordering Information
| Park Number | Type of Jack | No. of Jacks | Description |
| TTPFA96K1NS | TT | 96 |
1.75″ High, Normals strapped
|
| TTPFA96K1NO | TT | 96 |
1.75″ High, Normals brought out
|
| MTPFA48K1NS | MT | 48 |
1.75″ High, Normals strapped
|
| MTPFA48K1NO | MT | 48 |
1.75″ High, Normals brought out
|
Click here to download a schematic drawing
(you will need to have Adobe Acrobat installed on your system to do this)
TTP96AS Patchbay Series
The TTP96AS Patchbay Series offers the end user a rugged cable tray to support rear cabling.
Features and Benefits
• Unit features 96 TT jacks
• Attractive, corrosion resistant nickel-plated jacks
• Steel frame jack for superior jack life
• Extra wide labeling strips provide maximum space
• Rugged cable tie bar takes the weight of cables off the jacks
• Rugged, attractive black anodized aluminum face will not break
• Three jack configurations available for the exact switching arrangement you need: full normal, half normal, and open circuit panel
• Fanned solder terminals for easier solder connections
• Offset ground terminal for ease in making common ground buss connections
• Gold switching contacts for long-term reliability in normal-through connections
Specifications
Materials
Jacks
Frame: Steel, nickel-plated
Bushing: Nickel-plated copper alloy
Springs: Copper alloy solder lugs
Ground Terminal: Steel, tin electrodeposited
Switching Contacts: Welded, gold alloy inlay over palladium base
Insulation: Rigid plastic spacers, rigid PVC tubing through stack
Screws: Steel, plated
Panel
Frame: Black anodized aluminum
Inserts: Polyester, glass filled, 94V-0
Cable Support Bar: Cold rolled steel, nickel-plated
Designation Strips: Thermoplastic, 94V-0
Designation Strip Covers: Clear thermoplastic, SE-1
Marking Strip: Rigid vinylite
Jack Mounting Screws: Steel, plated
Screws: Steel, black plated
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: 0°C to +50°C
Electrical
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500V at 60 Hz AC
Working Voltage: 140 VDC maximum
Current Rating: 100 milliamps
Ordering Information
| Park Number | Type of Jack | No. of Jacks | Description |
| TTP96ASFN | TT | 96 |
Full normals
|
| TTP96ASHN | TT | 96 |
Half normals
|
| TTP96ASNN | TT | 96 |
No normals
|
Click here to download a schematic drawing
(you will need to have Adobe Acrobat installed on your system to do this)
MT48K/MT52K Patchkit Series
The MT48/52K Patchkit Series offers the end user a rugged cable tray to support rear cabling. Heavy duty construction takes weight off the back of the jacks for increased reliability. Available in 1.75″ or 3.5″ height versions.
Features and Benefits
• Kit features 48 1/4″ longframe jacks in one rack space (1.75″ high) or in two rack spaces (3.5″ high) or 52 1/4″ longframe jacks in one rack space (1.75″ high)
• Allows user to add cable and termination panel
• Removable jack panel from the front allows easy soldering of wire connections
• Jacks have gold switching contacts
• Fanned solder terminals for easier soldering
• Offset ground lugs allow easy bussing of ground with one wire
• Jacks have a nickel-plated frame and assembly screws
• Wire management straps are reusable and adjustable
Specifications
Materials
Jacks
Frame: Stamped nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel silver with welded contacts
Assembly Screws: Nickel-plated steel
Welded Contacts: Gold alloy
Panel
Front Panel: Thermoplastic
Frame: C.R.S. black epoxy painted
Designation Strips: Black polycarbonate 94V-0
Designation Strip Covers: Clear polycarbonate
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: 0°C to +50°C
Electrical
Contact Resistance: 30 milliohms maximum initial
Insulation Resistance: 10,000 megohms maximum
Dielectric Withstanding Voltage: 500V at 60 Hz AC
Working Voltage: 140 VDC maximum
Current Rating: 100 milliamps
Ordering Information
| Park Number | Type of Jack | No. of Jacks | Height |
Description
|
| MT48K1NS | MT | 48 | 1.75″ |
Normals strapped
|
| MT48K1FN | MT | 48 | 1.75″ |
Full normals
|
| MT48K1HN | MT | 48 | 1.75″ |
Half normals
|
| MT48K1NN | MT | 48 | 1.75″ |
No normals
|
| MT52K1NS | MT | 52 | 1.75″ |
Normals strapped
|
| MT52K1FN | MT | 52 | 1.75″ |
Full normals
|
| MT52K1HN | MT | 52 | 1.75″ |
Half normals
|
| MT52K1NN | MT | 52 | 1.75″ |
No normals
|
| MT48K3FN | MT | 48 | 3.5″ |
Full normals
|
| MT48K3HN | MT | 48 | 3.5″ |
Half normals
|
| MT48K3NN | MT | 48 | 3.5″ |
No normals
|
| MT52K3FN | MT | 52 | 3.5″ |
Full normals
|
| MT52KHN | MT | 52 | 3.5″ |
Half normals
|
| MT52K3NN | MT | 52 | 3.5″ |
No normals
|
Click here to download a schematic drawing
(you will need to have Adobe Acrobat installed on your system to do this)